125 KHZ READER

Converts radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. The tags and readers have to be tuned to the same frequency to communicate.
The frequency supported by the reader is 125 KHz.
Designed as a Plug & Play Module and can be plugged on a Standard 300 MIL – 28 Pin IC socket form factor.
Supports reading of 64 Bit Manchester Encoded cards.
Pins for External Antenna connectio

Features & Specifications

Serial Interface
Interface	RS 232 (TTL), Wiegand, Others (on demand)
Connector	9 Pin Female for MDV, Berg Pins (MD) and RMC for Wiegand (Optional)
Baud Rate	9600
Data Bits	8
Parity	No Parity
Stop Bits	1
Data Format	Send Tag ID HEX Value in ASCII format with Carriage Return and Line-Feed
Network
Frequency	125 KHz
Read Range	up to 7 cm
Supported TAG	Supports reading of 64 Bit Manchester Encoded Cards
Wiegand	26 Bit Format
Indications
Visual	LED Blinking for TAG read. Green LED in MDV. Berg Pin in MD
Audio	Single BEEP for TAG read. Buzzer in MDV. Berg Pin in MD
Power
Input for RFID MD	5 V DC ( ± 5 %)
Input for RFID MDV	9 V DC
Input for RFID PB	12 V DC
Maximum Current Consumption	60 mA
Environmental
Operating	-20 ºC to 65 ºC
Storage	-40 ºC to 75 ºC
Packaging
Dimensions for MDV	36 mm(L) x 18 mm(W) x 10 mm(H)
Dimensions for MD	41 mm(L) x 21 mm(W) x 7.5 mm(H)
Dimensions for PB	100 mm(L) x 57 mm(W) x 32 mm(H)
Antenna Board Dimensions	46 mm (L) x 45 mm (W)
Weight	55g for MDV, 5g for MD & 75g for PB
Warranty	6 months for MDV , 3 months for MD & 12 Months for PB

Model Number	Description
RFID 125 MD	RFID Reader Module
RFID 125 MDV	RFID Reader Module with Base Board with RS 232 Port
RFID 125 PB	RFID Reader Module enclosed in a Plastic Box