RFID/ NFC Readers

rfid
RFID Readers Convert radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. RFID tags and readers have to be tuned to the same frequency in order to communicate. RFID systems use many different frequencies, but the most common and widely used & supported by our Reader is 125 KHz.

125 KHz Reader

    img

125 KHZ READER

    RFID-125
  • Converts radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. The tags and readers have to be tuned to the same frequency to communicate.
  • The frequency supported by the reader is 125 KHz.
  • Designed as a Plug & Play Module and can be plugged on a Standard 300 MIL – 28 Pin IC socket form factor.
  • Supports reading of 64 Bit Manchester Encoded cards.
    Pins for External Antenna connectio

Features & Specifications

Serial Interface
Interface RS 232 (TTL), Wiegand, Others (on demand)
Connector 9 Pin Female for MDV, Berg Pins (MD) and RMC for Wiegand (Optional)
Baud Rate 9600
Data Bits 8
Parity No Parity
Stop Bits 1
Data Format Send Tag ID HEX Value in ASCII format with Carriage Return and Line-Feed
Network
Frequency 125 KHz
Read Range up to 7 cm
Supported TAG Supports reading of 64 Bit Manchester Encoded Cards
Wiegand 26 Bit Format
Indications
Visual LED Blinking for TAG read. Green LED in MDV. Berg Pin in MD
Audio Single BEEP for TAG read. Buzzer in MDV. Berg Pin in MD
Power
Input for RFID MD 5 V DC ( ± 5 %)
Input for RFID MDV 9 V DC
Input for RFID PB 12 V DC
Maximum Current Consumption  60 mA
Environmental 
Operating  -20 ºC to 65 ºC
Storage  -40 ºC to 75 ºC
Packaging 
Dimensions for MDV  36 mm(L) x 18 mm(W) x 10 mm(H)
Dimensions for MD 41 mm(L) x 21 mm(W) x 7.5 mm(H)
Dimensions for PB  100 mm(L) x 57 mm(W) x 32 mm(H)
Antenna Board Dimensions  46 mm (L) x 45 mm (W)
Weight  55g for MDV, 5g for MD & 75g for PB
Warranty   6 months for MDV , 3 months for MD & 12 Months for PB

Applications

  • Access Control
  • Vending Machines
  • Toll Roads
  • Airline Ticketing
  • Banking Cards
  • City Cards
  • ID Cards
  • University Cards
  • Phone Cards
  • Park and Ride

Ordering Information

Model Number Description
 RFID 125 MD  RFID Reader Module
RFID 125 MDV  RFID Reader Module with Base Board with RS 232 Port
RFID 125 PB RFID Reader Module enclosed in a Plastic Box

To Buy
contact us

13.56 MIFARE Reader / Writer

    img

13.56 MIFARE READER / WRITER

    RFID-MIFARE
  • Utilizes MIFARE® technology to Read and Write in to contact-less Smart Cards
  • Based on command and response for easy integration with PC running application through Serial Interface or with Micro Controller.

Features & Specifications

Serial Interface
Interface RS 232
Connector Berg Pins
Baud Rate 9600
Data Bits 8
Parity No Parity
Stop Bits 1
Network
Frequency 13.56 MHz
Read Range 50 mm, depending on the installation conditions
Cable Distance 50 ft or 15 meters
Power
Supply Voltage Regulated 9 V DC
Supply Current 80 mA
Environmental
Operating 0 ºC to 65 ºC
Packaging
Controller Board Dimensions 70 mm(L) x 50 mm(W) x 15 mm(H)
Antenna Board Dimensions 72 mm(L) x 56 mm(W) x 15 mm(H)
Weight 40 g
Warranty 6 months for RFID MF KIT
6 months for RFID MF PB

Applications

  • Access Control
  • Vending Machines
  • Toll Roads
  • Airline Ticketing
  • Banking Cards
  • City Cards
  • ID Cards
  • University Cards
  • Loyalty Schemes
  • Phone Cards
  • Park and Ride
  • Prepaid Metering

Ordering Information

Model Number Description
RFID MF KIT 13.56 MHz Reader & Writer / Antenna PCB / 2 Tags / Adaptor / Cable
RFID MF PB 13.56 MHz Reader & Writer / Antenna PCB in Plastic Enclosure

To Buy
contact us