Overview
Data Comm.
Internet
Messaging
Network
    Conv 485
    CS 428
    CS 428i
    EAD-01-100
    EAD-01-101
   
EAD-01-102
    EAD-01-101 BPPP
    EAD-02
    EAD-02W
    Ethernet I/O
    ISO 232
    Lantronix DCM
    Lantronix DS
    PLC 232
    Radmin
    RFID MF Kit
    RFID Module
    SWCS-232
    Xport

Security

SWCS-232 - RS232 to Wireless Converter   

SWCS-232 converts RS232 signal to wireless Bluetooth signal. If both ends of communication use SWCS-232, wireless 1:1 data communication will be available. Portability is maximized so that it can be applied to a PC, laptop, PDA, etc.

It is fully compatible with the serial COM port of PC, The product needs to be used in pairs.

SWCS-232 can be powered by the following methods : DC power supply, PC USB port through USB cable or DB9 pin connector (available only if special serial ports are used.)

Serial Specifications
Mode Asynchronous serial communication
Speed 1200bps~115.2kbps Full Duplex
Data Bits 8 Data Bits
Parity Odd, Even, No Parity
Signals Modem signals except RI
Buffer Size 760 Bytes
Flow Control RTS/CTS On/Off possible, DTR/DSR/DCD loop back connected
Stop Bits 1, 2 Stop Bits
Connector RS232 : DB9 Female 
Protection 15KV Surge Protection for all signals
RF Communication Specifications
Mode RF Communication
Speed Up to 921.6Kbps
Distance Max. 100m
RF Spec. Bluetooth Spec. V1.1 
Bandwidth 2.402~2.480GHz (ISM Band) 
RF Type Frequency Hopping (1,600times/sec)
Channels 79 channels
Modulation GFSK  
Antenna Internal Chip Antenna, Gain : Max. 1.5 dBi , Directivity : Non-directional Polarization : None
Hardware Specifications
Power Input 5~12VDC
Power Consumption Max. 200mA @ 5VDC
LED Link, TX, RX
Dimensions 74(W) 37(H) 19(D)mm
Weight 28g
Enclosure Plastic (Blue Color)
Environmental Specifications
Operating Temp. 0 ~ 55°C (32~131°F)
Storage Temp. -20~70°C (-4~158°F)
Humidity 5~95%, Non condensing
Connection

Features

  • Point to Point 2.4GHz RF Communication Compliant with Bluetooth Spec. V1.1

  • Fully compatible with PC serial COM ports

  • Reduced cabling expenses

  • Applicable to Portable Devices (The lightness of 33g and the small size)

  • USB port can be used for power supply

  • Communication status can be monitored through LEDs Stability, Noise-free and reliability through wireless communication.

 Bluetooth

Bluetooth wireless technology is a short-range communications technology intended to replace the cables connecting portable and/or fixed devices while maintaining high levels of security. The key features of Bluetooth technology are robustness, low power, and low cost.

The Bluetooth specification defines a uniform structure for a wide range of devices to connect and communicate with each other. A fundamental Bluetooth wireless technology strength is the ability to simultaneously handle both data and voice transmissions. This enables users to enjoy variety of innovative solutions such as a hands-free headset for voice calls, printing and fax capabilities, and synchronizing PDA, laptop, and mobile phone applications to name a few.

Power Supply Method

     SWCS-232 can be powered by the following methods : DC power supply, PC USB port through USB cable or DB9 pin connector (available only if special serial ports are used.)

Ordering information
Model Description
SWCS232 RS232 to Wireless Converter. Compliant to Bluetooth Specification V1.1. Package Contents- SWCS-232 2EA, 9VDC AC Adapter 2EA, USB power cable 2EA, Manual
 Copyright © Sparr Electronics Ltd. 2008        HOME    |    CONTACT US    |    SITE MAP