CS-428 converts RS232 signals to RS422 or 485. It is an efficient solution for applying advantages of RS422/485 to legacy RS232 devices. The converter operates with no extra software installation. With simple DIP switch toggling, RS422 or RS485 can be selected. Also, the product is fully compatible with serial COM port in PC. CS-428/9AT : RS232 to RS422/485 Converter, Auto Toggling Supports.

SWCS-232 converts RS232 signal to wireless Bluetooth signal. If both ends of communication use SWCS-232, wireless 1:1 data communication will be available. Portability is maximized so that it can be applied to a PC, laptop, PDA, etc. It is fully compatible with the serial COM port of PC, The product needs to be used in pairs.

Convert radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. RFID tags and readers have to be tuned to the same frequency in order to communicate. RFID systems use many different frequencies, but the most common and widely used & supported by our Reader is 125 KHz.

Connects a wide variety of electrical, electronic, and mechanical devices and sensors to computers and applications over standard Ethernet networks and the Internet. This provides the management console using Telnet and Serial console port under the password protection support.

Device Servers - Quickly and conveniently add Ethernet and IP network access to most devices with a serial port (RS-232, RS-422/485).

Lantronix brings together pioneering first in secure console managers, Remote KVM™ solutions, remote power management, terminal and print servers to deliver the world's most effective secure line of remote enterprise management solutions.

It is the most compact, integrated solution available to Web-enable any edge device with a serial interface. By integrating the XPort into a design, you can make any electronic product a smart device.

EAD-01 is a low cost Serial RS-232 to Ethernet LAN 10/100BASE-T connectivity system using the TCP/IP protocol and based on a HCS12 Microprocessor.

The EAD 02 connects peripherals through a transparent TCP data channel or a Telnet connection to computers or another EAD 02. Datagram's (protocol blocks) can be sent by UDP. The Network interface speed is 10-Mbit for Ethernet.

A module for manufacturers who want to embed PPP connectivity in their products quickly and easily. The  compact EAD-01-101BPPP module adds network connectivity to your devices with a serial interface on its host microcontroller.

EAD 01-102, is a low cost Serial RS-232 to Ethernet LAN 10/100Mbps connectivity system using the TCP/IP protocol and based on a high speed 32-bit Microprocessor.

The RS232 Serial Port Isolator – Model ISO 232 is primarily intended to provide complete Isolation between the Expensive Computer or System from the Serial Device, so that they are protected against any inadvertent damage. The ISO 232 also provides necessary immunity to Computer or system against Electrical Noise.

The Sparr CONV 485 is a Converter, which converts the  RS 232 Serial Port Signals to RS 485 or RS 422 signals for long distance driving and for interfacing devices supporting RS 485 or RS 422 Ports.

PLC-232 converts RS232 communication data to be transferred using the PLC (Power Line Communication) technology, which, in short, operates as an RS232 to PLC converter. With no additional communication cabling, serial device communication is available using only the existing Power line.

The Wireless Device Server - EAD-02 WB enables you to connect Two Serial Devices to 802.11b wireless networks quickly and easily. By merging Wireless Communications and Lantronix Device Server technology.EAD-02W simplifies Connectivity to devices in Applications where Mobility is required or cabling is Impractical.

CS-428i is an RS232 to RS422/485 converter with an enhanced Opto-Isolation feature(3KV) specialized for industrial purposes that require high stability and reliability in communication.
It supports a true communication speed of 921.6Kbps for RS232 side as well as RS422 and RS485 sides.

Radmin is an award-winning remote control program  that enables you to work on one or more remote computers from your own. It is a complete remote control solution with all key features such as File Transfer, NT security, Telnet and Multilanguage support included.