The Line Powered Auto Dialer is a micro-controller based Stand alone Unit that interfaces the Fax machine to the FS&F Server. The Auto Dialer obviates the chore of dialing the Server number, dialing the User ID and Password and then dialing the destination number, every time a user wants to send a Fax through the FS&F service. The Auto Dialer unit is based on a PIC16F628 micro-controller. It has built in 2KB EPROM, 128 Byte RAM.

The BU-01-101 is a data Acquisition and storage device which can store the acquired data from serial, digital I/P, analog I/P etc to a commonly used, available and low cost USB Flash Device. Bu-01-101 provides tremendous functionally when it comes to acquiring data from a remote and/or un-attended location with little or no connectivity in terms  of broad band /Dialup internet.

The Sparr CONV 485 is a Converter, which converts the  RS 232 Serial Port Signals to RS 485 or RS 422 signals for long distance driving and for interfacing devices supporting RS 485 or RS 422 Ports.

CS-428 converts RS232 signals to RS422 or 485. It is an efficient solution for applying advantages of RS422/485 to legacy RS232 devices.

CS-428i is an RS232 to RS422/485 converter with an enhanced Opto-Isolation feature(3KV) specialized for industrial purposes that require high stability and reliability in communication.
 

EAD-01-100 is a low cost Serial RS-232 to Ethernet  LAN 100BASE-TX connectivity system using the TCP/IP and UDP protocol and based on Lantronix XPORT Device Server Module.

EAD-01 is a low cost Serial RS-232 to Ethernet LAN 10/100BASE-T connectivity system using the TCP/IP protocol and based on a HCS12 Microprocessor.

A module for manufacturers who want to embed PPP connectivity in their products quickly and easily. The  compact EAD-01-101BPPP module adds network connectivity to your devices with a serial interface on its host microcontroller.

The EAD 02 connects peripherals through a transparent TCP data channel or a Telnet connection to computers or another EAD 02. Datagram's (protocol blocks) can be sent by UDP. The Network interface speed is 10-Mbit for Ethernet.

The Wireless Device Server - EAD-02 WB enables you to connect Two Serial Devices to 802.11b wireless networks quickly and easily. By merging Wireless Communications and Lantronix Device Server technology. EAD-02 W simplifies Connectivity to devices in Applications where Mobility is required or cabling is Impractical.

Connects a wide variety of electrical, electronic, and mechanical devices and sensors to computers and applications over standard Ethernet networks and the Internet.

GSM Modem provides full functional capability to Serial devices to send SMS and Data over GSM Network. The product is available as Board Level or enclosed in Metal Box.

The RS232 Serial Port Isolator – Model ISO 232 is primarily intended to provide complete Isolation between the Expensive Computer or System from the Serial Device, so that they are protected against any inadvertent damage. The ISO 232 also provides necessary immunity to Computer or system against Electrical Noise.

Multi-PCMCIA is a serial port PCMCIA card for the notebook computer. By connecting one asynchronous device like a terminal, modem, printer, or scanner, the PCMCIA Multi-1A makes the notebook more economical and powerful as the multi-device system. Transmission speed rises up to 921.6Kbps.

Device Servers - Quickly and conveniently add Ethernet and IP network access to most any device with a serial port (RS-232, RS-422/485).

Lantronix brings together pioneering first in secure console managers, Remote KVM™ solutions, remote power management, terminal and print servers to deliver the world's most effective secure line of remote enterprise management solutions.

Multi-1/PCI Series is a Universal PCI Multi port Serial Board designed for POS, ATM, OA and FA applications. Multi-1/PCI Series is designed to supply 5V and 12V power to an external device by using the No. 9 pin (RI signal line) according to a user's choice. The function allows you to utilize devices requiring low-power consumption such as
barcode readers and receipt printers without an additional power supply.

Multi-4,8/USB Series enables the connection of up to 4 or 8 asynchronous serial devices such as terminals, modems, printers, and scanners to make a PC an economical but a powerful multi-user and multi-device system. TXD and RXD LEDs are included in the product for the displays of data transmission.

PLC-232 converts RS232 communication data to be transferred using the PLC (Power Line Communication)  technology, which, in short, operates as an RS232 to PLC converter. With no additional communication cabling, serial device communication is available using only the existing power line. It is fully compatible with the serial COM port of PC. The product needs to be used in pairs.

Convert radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. RFID tags and readers have to be tuned to the same frequency in order to communicate.

MIFARE is the most widely installed contact less smart card technology in the world. SEL's affordable smart card reader/writer utilizes MIFARE® technology to read and write to contact less smart cards. Contact less smart cards can be used for many applications such as Access Control, Vending, Toll Roads, Airline Ticketing, Banking Cards, City Cards, ID Cards, University Cards, Loyalty Schemes, Phone Cards, Park and Ride, and Prepaid Metering.

SWCS-232 converts RS232 signal to wireless Bluetooth signal. If both ends of communication use SWCS-232, wireless 1:1 data communication will be available. Portability is maximized so that it can be applied to a PC, laptop, PDA, etc.

It is the most compact, integrated solution available to Web-enable any edge device with a serial interface. By integrating the XPort into a design, you can make any electronic product a smart device.

MIFARE is the most widely installed contact less smart card technology in the world. SEL's affordable smart card reader/writer utilizes MIFARE® technology to read and write to contact less smart cards. Contact less smart cards can be used for many applications such as Access Control, Vending, Toll Roads, Airline Ticketing, Banking Cards, City Cards, ID Cards, University Cards, Loyalty Schemes, Phone Cards, Park and Ride, and Prepaid Metering.

EAD 01-102, is a low cost Serial RS-232 to Ethernet LAN 10/100Mbps connectivity system using the TCP/IP protocol and based on a high speed 32-bit Microprocessor.