ETH I/O is a Device that is used for checking input status and controlling the devices, which are attached to ETH I/O over Modbus TCP or Modbus RTU protocol. It enables remote gauging, managing and control of Device through the network based on Ethernet and TCP/IP or through RS232.

Regarding Internet connectivity, the ETH I/O supports open network protocols such as TCP/IP allowing Devices to be accessed over broadband network or conventional LAN (Local Area Network) environment. The ETH I/O provides the management console using Telnet and Serial console port under the password protection support.

The ETH I/O is available in 2 models. One is ETH I/O 1208 and ETH I/O 0505. This capability brings the advantages of remote management and accessibility to other devices over the network.

The ETH I/O 1208 is the most cost effective monitoring and controlling device. The ETH I/O 1208 is having 12 relay outputs, 8 optically isolated inputs and 2 analog inputs. The ETH I/O 0505 is having 5 relay outputs, 5 optically isolated inputs. Both the models supports Modbus TCP for network communication and Modbus RTU for RS232 serial communication.

This product also supports RS 232 Serial Interface if you would like to use the Serial port for Data Transfer and also if you would like to use PC connected to the Serial port in controlling the I/O Devices.

Application

This Firmware has the following Functions:

• Building Control system
• Simple Access Control system
• Alarm report from an emergency alarm device
• Automatic Testing Equipment
• Remote RESET of a locked-up Server / Network device
• Building Control and Management
• Remote Measurement with the possibility to take Feedback action
• Factory Floor Control and Management
• Simple Parking-stand system

ETH I/O 1208